|
|
Automatic Corrosion Mapping
System |
| |
|
□
Multiscan |
| |
|
Overview
Automated Remote Ultrasonic
Corrosion Mapping System
The MultiScan is a rugged PC
based, remote operated 2-axis
ultrasonic crawler system.
Designed to allow
cost-effective corrosion
mapping inspection to be
undertaken on carbon steel
pipework, above ground storage
tanks, spheres, risers, rigs,
steelwork and shipping without
the need for costly
scaffolding or rope access
services.
Unlike other crawlers the
addition of a 2nd encoded
scanning axis allows full real
time C-Scan inspections to be
performed.
Technical Specification
Download Spec-sheet |
| |
|
| |
Computer Based Training
Program |
| |
|
□
Simula ND Training Program |
| |
|
Overview
Sonatest are worldwide
distributor for Simula’s
unique CD-ROM computer based
training programmes.
These innovative multimedia
products are bursting with
examples, simulations and
interactive animations.
It is user friendly with
excellent graphics and good
technical information.
Utilising vocal guidance,
interactive text and
animations, film clips and
theory consolidation
exercises, these courses offer
the user a wide variety of
stimulating exercises through
which to build knowledge in
this field.
Technical Specification
Download Spec-sheet |
| |
|
| |
Eddy Current Instruments |
| |
|
□
TrecScan Qinetiq |
| |
|
Overview

TRECSCAN® is an advanced
transient eddy-current
scanning system using probes
containing Hall sensors.
The system now has recognised
potential for the detection of
deep corrosion and cracks in
ageing aircraft fleets.
There are significant benefits
to be realised from the use of
transient eddy-currents in
terms of reduced inspection
time and ease of acquisition
and analysis of the data.
Large areas of structure
incorporating multiple
variations in thickness can be
scanned without the need for
any probe or set-up changes.
In addition, the use of a Hall
sensor rather than a coil as a
magnetic field detector
improves the spatial
resolution and detectability
of deep defects.
|
| |
|
| |
Extreme Temperature Couplants |
| |
|
□
Pyro Gel |
| |
|
Overview

Provides high coupling over a
wide temperature range. It
does not solidify therefore
helping to extend transducer
life.
Residue after thermal
decomposition consists of
silica and can be removed with
a mild detergent and water.
Sonotech Inc are represented
by Sonatest NDE in Europe and
Asia only.
Technical Specification
Thickness Gauging: -45.6° to 426°C (-50° to 800°F)
Flaw Inspection: 10° to 315°C (50° to
600°F)
|
| |
|
□
Sono 1100 |
| |
|
Overview

Sono 1100 allows readings to
be achieved at a higher
temperature range and does not
solidify, helping transducer
longevity.
Sonotech couplants do not
contain perfluorocarbons and
all are non-toxic and
non-irritating.
Sonotech Inc are represented
by Sonatest NDE in Europe and
Asia only.
Technical Specification
Thickness Gauging: 370° to
593°C (700° to 1100°F)
Flaw Inspection: 370° to 482°C
(700° to 900°F)
|
| |
|
□
Sono 600 |
| |
|
Overview

Non toxic, non irritating and
biodegradable. Economical
alternative to silicone based
couplants.
Remove with common solvents or
detergent & water.
Sonotech Inc are represented
by Sonatest NDE in Europe and
Asia only.
Technical Specification
Thickness Gauging: -18° to 315°C (0° to 600°F)
Flaw Inspection: 10° to 260°C (50° to
500°F)
|
| |
|
□
Sono 950 |
| |
|
Overview

At high temperatures, Sono 950
maintains acoustic coupling
beyond 15 seconds to give
ample time for achieving good
thickness readings.
In many applications signal
strength actually increases
with time to the point of
thermal decomposition.
Sonotech Inc are represented
by Sonatest NDE in Europe and
Asia only.
Technical Specification
Thickness Gauging: 315° to
510°C (600° to 950°F)
Flaw Inspection: 315° to 385°C
(600° to 725°F)
|
| |
|
□
Sono Temp |
| |
|
Overview

Apply where elevated
temperatures result in sound
coupling difficulties, such as
flow metering.
Maintains a paste like
viscosity within its effective
operating range.
This couplant does not
solidify and helps to extend
transducer life. Sonotech
couplants do not contain
perfluorocarbons and all are
non-toxic and non-irritating.
Sonotech Inc are represented
by Sonatest NDE in Europe and
Asia only.
Technical Specification
Thickness Gauging: 121° to
371°C (250° to 700°F)
Flaw Inspection: -1° to 315°C
(30° to 600°F)
|
| |
|
| |
Handheld Inspection Systems |
| |
|
□
Snake Eye |
| |
|
Overview

SnakeEye is the latest in
remote visual inspection
technology.
It is indispensable for
inspection in restricted areas
in the aviation, civil
engineering, plant
maintenance, marine surveying
and petro-chemical industries
- as well as security
applications.
Water proof and chemical
resistant to 30m (100ft), the
standard 30mm (1.2ft) white
light LED lit camera and the 5
inch TFT LCD colour screen
give exceptionally wide, 46
degree, viewing capabilities.
Images can be captured via the
video I/O port to PC and to
increase performance can be
used with an optional coupling
lens and camera to standard
(optional) rigid or flexible
endoscopes (boroscopes), where
inspection of small gaps is
required.
Find small problems in hard to
reach areas before they become
major breakdowns.
Technical Specification
LED lit camera
Colour viewing screen
Water/chemical resistant
Flexible
Up to 33m (100ft) extension
available
90 minutes autonomous
operation
Download Spec-sheet |
| |
|
| |
Industrial Inspection Systems |
| |
|
□
IRIS 9000 |
| |
|
Overview

Internal Rotary Inspection
System for ultrasonic wall
thickness measurement of heat
exchangers, fin fan air
coolers, boilers, chillers
etc.
Iris Inspection Services Inc
supply to the majority of the
US petrochemical industry.
Representing the 7th
generation of digital IRIS
systems developed in-house the
IRIS 9000 has more than 20
years of field experience
incorporated in its design.
Technical Specification
Optional:IRISVISION - tube
sheet mapping software and
100% C-scan software.
|
| |
|
□
Scantech Instruments Analyst
D2S |
| |
|
Overview

Analyst D2S is a dual dryer
scanning system designed to
fill the unique requirements
of ultrasonic inspection on
cast iron paper machine dryer
rolls.
The system scans and records
velocity and time of flight
information, ensuring proper
calibration at any point on
the roll.
The D2S also provides the
flexibility and reporting
capabilities of the Analyst
software.
|
| |
|
| |
Manual Corrosion Mapping
Systems |
| |
|
□
Thetascan |
| |
|
Overview

Manual ultrasonic corrosion
mapping system.
The ThetaScan scanner and
C-Scan imaging software adds
additional functionality to
the Sonatest range of
ultrasonic flaw detectors.
The addition of the ThetaScan
system along with a notebook
PC enhances the capabilities
of the Sitescan and Masterscan
flaw detectors to produce a
cost-effective, state of the
art manual corrosion mapping
system.
The scanner is available with
magnetic feet or a suction cup
vacuum system for scanning
ferrous and non-ferrous
materials respectively.
Sonatest NDE represent
Inspection Solutions
worldwide.
Download Spec-sheet |
| |
|
| |
Non-Destructive Evaluation
Software |
| |
|
□
Qinetiq And Scan |
| |
|
Overview

ANDSCAN® is a versatile
Windows™ application for
acquiring and analysing
2-dimensional scans of
Non-Destructive Evaluation (NDE)
data.
Typical uses include
ultrasonic scanning of
composite structures for
aerospace and motor-sport
applications, eddy-current
imaging of multi-layered
aluminium structures and
low-frequency vibration scans
of sandwich composites.
|
| |
|
| |
Remote Inspection Systems |
| |
|
□
Scantech Instruments C1
Spider |
| |
|
Overview

Remote Ultrasonic Storage Tank
& Vessel Scanner Scantech
Instruments Inc., used
primarily for ultrasonic
corrosion testing of storage
tanks, walls, and roofs to
determine the remaining
thickness.
A robust scanner which is
extremely manoeuverable
utilising exceptional
mechanical design to maintain
adherence to a tank wall.
The Spider can be used with
any standard ultrasonic flaw
detector or Sonatest Digital
Flaw Detector for continuous
encoded B-scan measurements
using the optional “Analyst”
Data Acquisition and reporting
software package.
The vehicle can be adapted to
be used with a TOFD attachment
for weld inspection which has
an optional video camera
attachment for weld alignment
or remote visual inspection.
Technical Specification
Four driven, high strength,
rare earth magnetic wheels.
Flexible suspension & high
torque Joystick control.
Water used as a couplant
Constructed from lightweight
high performance materials
Download Spec-sheet |
| |
|
| |
Ultrasonic Inspection Systems |
| |
|
□
UltraScan 5 |
| |
|
Overview

Ultrasonic Inspection and
Analysis System.
Easy-to-use 32-bit Windows
interface
High-speed Distance Amplitude
Correction (DAC)
A-Scan, B-Scan, C-Scan and
TOFD
Portable computer for field
inspections
Pitting, corrosion,
lamination, and crack
detection
Real-time A-scan and
oscilloscope display
WeldScan 5 - Multi-Channel
Ultrasonic Pipeline Inspection
& Analysis System Automated,
portable inspection system for
easy field inspections
Scanning speeds up to 200
mm/second 16 - 32 Channels
Circumferential and
longitudinal single-pass
scanning.
Technical Specification
All inspection systems
include: a top-of-the-line
computer with a genuine Intel
processor (rackmount,
lunchbox, or user-specified),
a standard scanner, a fork,
wedge, and transducer
(user-specified), data
acquisition software with
automated report generation.
A wide-range of options and
custom features are available
upon request.
Download Spec-sheet |
| |
|
| |
Ultrasonic Spectroscopy
Systems |
| |
|
□
UltraSpec |
| |
|
Overview
Ultraspec is a novel system
for Ultrasonic Spectroscopy
developed by the Southern
Research Institute and
licensed by Sonatest.
It has unique capabilities to
address otherwise impractical
inspection applications such
as multi-layer bonded
structures and quantification
of porosity or surface
roughness from early corrosion
activity.
Ultraspec uses a continuous
swept-frequency input signal,
which can cover a wide range
of frequencies without
compromising energy. This
results in a greatly improved
signal to noise ratio,
allowing the frequency range
to be optimized for the
application and the amplitude
to be adjusted with frequency
to ‘normalize’ the transducer
response.
This permits ‘standard’
transducers to be used, rather
than requiring very
highly-damped low-efficiency
types.
A dual Fourier-Transform
signal analysis of the
received signal allows
resonances associated with
individual parts of a
structure to be identified.
Ultraspec is primarily used in
research applications. These
include measurement of bond
quality and ‘kissing’ bonds,
in metallic and composite
structures, as well as
monitoring of corrosion due to
breakdown of protective
coatings, allowing repair of
coatings before metal
replacement is required.
|
| |
|
| |
Ultrasonic Testing Boards |
| |
|
□
Ultratrek DSPUT5000 |
| |
|
Overview

Ultrasonic Pulser/Receiver and
100MHz A/D Board for PCI Bus
with DSP.
On board DSP Chip for worlds
fastest ultrasonic data
processing.
One-Board Design: Pulser/receiver
and A/D converter on one PCI
board.
32-bit master mode PCI bus for
ultra-fast data transfer.
|
| |
|
□
Ultratrek PRM |
| |
|
Overview

4 Channel Ultrasonic Pulser/Receiver
Board for PCI Bus.
PCI bus pulser/receiver board
for the new generation of
computers
Single board 4-channel pulser/receiver
On-board microprocessor for
various custom applications.
Download Spec-sheet |
| |
|
□
Ultratrek UTM |
| |
|
Overview

4 Channel Ultrasonic Pulser/Receiver
and 100MHz ADC Board for PCI
Bus
One-Board Design: 4-ch pulser/receiver
& A/D converter on a single
PCI board
32-bit PCI bus for ultra-fast
data transfer
On-board microprocessor for
various custom applications up
to 4 on-board encoder counters
for on-position acquisition.
Download Spec-sheet |
| |
|
| |
Ultrasonic Virtual Instruments |
| |
|
□
SectorScan |
| |
|
Overview

Digital ultrasonic B-Scan
Notebook PC Imaging System.
The SectorScan system is a
fully fledged portable
Notebook PC Ultrasonic Virtual
Instrument, allowing true
ultrasonic cross sectional
imaging and defect analysis
with full A-Scan digitizing
and storage.
Supplied in a rugged extruded
aluminium case SectorScan
connects to the PC through the
computer’s parallel port.
The unit comprises of the
ultrasonic transmitter,
receiver circuitry and
autoranging power supply,
along with high speed
digitizer and encoder
interfaces.
The software provides standard
flaw detector A-Scan
presentation and controls and
simplifies training
requirements and unit
operation for experienced UT
operators.
Also included are controlled
amplifiers and filter
controls, 2 gates with
independent flank and peak
triggering and B-Scan image
colour palette options.
Images are acquired with a
single probe axis which can be
encoded or free running.
There are measurement options
for defect length and height,
parabolic cursors to aid in
defect length measurement and
SAFT processing for
dimensionally correct defect
viewing.
Further, full replay of image
A-Scans along with the ability
to optimize signal gates
offline allow internal defect
analysis and thickness
profiling to be undertaken and
validated post inspection.
SectorScan can be used with
our encoded manual probe
carriage, TankScan scanner
systems, as well as third
party manual and automated
scanners. Sonatest NDE
represent Inspection Solutions
worldwide.
|
| |
|
□
SectorScan TOFD Add-On Option
|
| |
|
Overview
Available as a low cost
upgrade to the SectorScan
system is the TOFD kit.
Comprising of SectorTOFD
software module, one pair of
5MHz Probes and 600 wedges, A
or H frame manual scanner,
40dB Preamp and additional
cabling.
Sonatest NDE represent
Inspection Solutions
worldwide. |
| |
|
|